ROCKTRONSHORT SCALE PRECISION FLATS™ SETS BASS STRINGS
SHORT SCALE PRECISION FLATS™ SETS BASS STRINGS
Long revered as the "Sound of Chocolate," Precision Flats™ sound and feel like rock and roll history! Stainless steel ribbon wire is wound over a hex core, and polished to a velvety smooth finish. This makes a string that is deep and percussive, with a bit of throat on the attack. The top end is pulled back too, with a smoothness to the notes as you climb the fretboard. You'll sit in the mix with a deep authority, ready to anchor the band all night.
Why Should You Play Precision Flats?
- You want to sit low in the mix, and anchor the groove
- You know there's magic with a Fender P-Bass and flats!
- You want that authentic vintage sound and feel
| SKU | Set |
|---|---|
| 3020 SET | SHORT SCALE PRECISION FLATS™ SETS BASS STRINGS - 3020 SET - SHORT SCALE 32.75 WIND PRECISION FLATS™ BASS STRINGS 45-95 |
| 3030 SET | SHORT SCALE PRECISION FLATS™ SETS BASS STRINGS - 3030 SET - SHORT SCALE 32.75 WIND PRECISION FLATS™ BASS STRINGS 45-105 |
Hi, I have a Harley Benton (Mustang style) bass that officially has a scale of 30". It's not a through-body, so the distance from end of bridge to nut is 31". The distance from end of bridge to the tuner of the E string is roughly 33".
I see your winding length is 32.75". This should work, right? Long enough from bridge end to saddle, short enough to cut beyond the winding. Could you please confirm? Thank you.
I have a DanElectro Red Hot Longhorn bass, and just purchased a set of D'Addario ECB81S short scale chromes (45-100) and found that the ball end and the tuner end on the E and A strings was too big to go through the bridge/tuning peg. What is the diameter of these strings next to the ball end and above the taper which goes into the tuner?